Option 2: Back of Truck Mount Bracket for King Tailgater, Flex, and Quest
Model: DB-Bolt-On-King

• FOR KING TAILGATER, FLEX, and KING QUEST models ONLY!
• Drill attachment method - DON"T WORRY, we make this as painless as possible by including our compression nut and bolt kit! (shown at bottom of this page)
  No taking the sleeper apart and no second person inside your rig with a wrench are necessary.
• Includes warranty-approved, anti-vibration shock feet in the bracket.
• 2 inches up and down final adjustment
• 4 inches "in-and-out" horizontal final adjustment
• Works with older style Tailgater Qube shape and Flex, or the newer, smaller Tailgater and Quest.
• Save $20 if this mount is bought bundled WITH your King satellite from us at -> THIS LINK!
• King product page is at ->
• this link

Sliding Mounting Bracket (bolt-on) truck bracket for King Tailgater and Quest

9.99 separately
(or .99* bundled)

For expedited shipping or Canadian orders, please call in for quote

* Save 50% off when this mount is bought bundled WITH your King satellite from us at -> THIS LINK!

Option 3: Retrofit Spacer (for those with an existing older VuQube V10 on their truck already!
Model: DB-SAT-RETRO

• WHY? Older VuQube's are 18 inces tall. Newer Tailgaters, Quests, and Winegards are 14 inches tall.
• You don't need a new bracket - you need a spacer to place on top of your existing bracket
• Our sliding spacer retrofit kit raises your new Winegard, King Tailgater, or King Quest so that the top of the dome is the same hight as your older VuQube
• Who needs this? - ONLY THOSE WITH AN OLDER MOUNT ALREADY ON THEIR TRUCK.
• "Does it bolt to my existing VuQube bracket?" - YES!
• All hardware is included
• TWO VERSIONS - King "Tailgater or Quest" AND "Winegard "X1 / G2 / D4 / T4"
• King Tailgater and Quest version has rubberized shock feet for King Warranty purposes
• This kit is slotted so that you can slide it closer or further from the back wall of your truck.

DieselBoss Retro Spacer Kit For expedited shipping or Canadian orders, please call in for quote Option 4: "Window PLUS Load-Lock" combo mounting unit
Model: DB-WM1

• Slips easily over window without getting out of the vehicle
• Goes HIGHER than competing window models
• Light and strong aluminum and stainless construction
• Includes 4 bolts to secure Tailgater or Flex model units to the plate (for Winegard models, use the bolts that came with your unit.)
• Rubber "tilt" adjuster is against the glass
• Seals window up tight in rainy, got, or cold weather because you run the coax cable through the door frame rubber gasket
• ALSO includes all of the features shown in the load-lock mount directly below
• Load lock pipe is NOT included
• For Winegard X1, G2, D4, and T4. OR for King Flex, King Quest, VuQube, & Tailgater models
• Not designed for leaving the satellite antenna attached to the load lock or the window while the truck is in motion

Option 5: Load Lock (only) Mount (same as option 3 above without the window kit)
Model: DB-LL

• Slips inside of all standard load-lock pipes. (Remove the single bolt holding your lock-lock foot on first)
• Includes 4 bolts to...