Satellite dish switch

  • This switch features DISH Pro Plus Technology.
  • LNBF inputs supporting four orbital locations, four receiver outputs, expansion ports to connect additional switches.
  • A power inserter is included.
  • Cascadable up to 3 switches (total of 12 outputs)
  • DISH Pro Plus technology
  • LNBF inputs for three orbital locations
  • Three receiver outputs (including up to three DISH Pro Plus dual-tuner receivers when used with DISH Pro Plus Separators)
  • No power supply required
  • Can be used as a ground block
  • DishPro technology.
  • Use this device to hook up 4 Dish Network receivers to 3 satellites
  • NOTE: Will not work with DishPro Plus LNBFs. For these type of LNBFs, you will need the DPP33 or DPP44 switch. This will only work with Dish 311 or 322 receivers.


Regular price $49

6 7
  • Two inputs for use with up to three orbital locations
  • 1 tuner output
  • Can be used with a DishPro Twin (or DishPro Quad LNBF) and a DishPro Single LNBF to provide three orbital locations to one tuner
  • Does not require power insertion
  • Can be used indoors and outdoors
141340 DP34 3x4 Multiswitch Dish Network DishPRO DP34 with Ground 8 DishPro Adapter This adapter will allow your legacy receivers to use the new DishPro LNB's. It is required for all DISH Network Receivers; 1000, 2000, 2700, 2800, 3000, 3700, 3800, 3900, 4000, 4700, 4900, 5000, 6000, 7100, 7200 and newer, when used in conjunction with DISHPro LNBFs.

Sale $45

The DISH Pro Plus Separator is to be used in conjunction with a DISH Pro Plus switch or LNBF to connect the two satellite tuner inputs of a DISH Pro Plus (dual-tuner) receiver using one cable. 107107 DP34 3x4 Multiswitch Dish Network DishPRO DP34 10
  • Satellite Multi-Dish Switch.
  • Used for Dish Network and Bell Expressvu.
  • Works as an SW21 or cascaded with the SW21 to connect 3 dishes and one receiver to pick up signals from 3 SATs at 110 and 119 and 129 or 61.5.
  • It can also work alone as a regular SW21 switch.
  • Solder backed
  • 950 MHz–2150 MHz
  • Compatible with Legacy or VIP Systems
  • Replaces Dish Network SW21 switch.

Remember to turn your receiver OFF (using the Power OFF/ON switch) and disconnected from power before connecting or disconnecting a switch. Damage to switch as a result of connection to a powered receiver will void your warranty. Switch is guaranteed not to be DOA (Dead on arrival. See about switches.

We are a DISH NETWORK authorized retailer.Check here for latest offers on Dish Network programming for new customers. After you get and install your new receiver, call Dish Network to activate the receiver.

Davey Switch 4X1 DiSEqC Satellite Dish FTA Receiver 4 in 1 Multi LNB LNBF
Home Theater (Davey)
  • Connect up to four LNBFs (or dishes) to your receiver using our 4x1 DiSEqC switch.
  • Frequency Range: 950-2400MHz
  • Insertion Loss: 3dB
  • Power Passing: 500mA Max
  • DiSEqC 2.0
ECHO STAR Dish Network - Bell Express Vu Original SW44 Satellite Lnb Switch
  • Converts two dual LNBs to power up to four receivers
  • Compatible with DSS LNBs/Dish Network/Bell express vu
  • 4x4 switch
Orbital Tracker Weatherproof 4X1 DiSEqC 2.0 4x1 with cover Switch Satellite LNBF Dish for FTA Receiver
CE (Orbital Tracker)
  • 4x1 DiSEqC 2.0 support bi-directional DiSEqC full control functions.
  • Allow remote units to report their possible and actual configuration.
  • Support DiSEqC stand-by commands
  • 1 output for receiver with DiSEqC commands function
  • Backwards compatibility with Tone Burst
JVI JVI 35-SW21X 2-in-1 Multi-dish SW21 Switch
Speakers (JVI)
  • Compatible with Dish Network and Bell Expressvu
  • Works similar to SW21 to connect 2 dishes
  • Compatible with Legacy and Dish Pro DISH Systems
Dish Network Dish Network DPP44 Power Inserter
CE (Dish Network)
  • Required power supply for Dish Network DPP44 switch.
  • Not compatible with other Dish Network multiswitches.

Related posts:

  • avatar Why are satellite dishes concave.
  • avatar Who invented the satellite dish?