Dish satellite Receivers

DISH Wally HD Satellite Receiver Tech SpecsDISH Wally HD Satellite Receiver Tech Specs

Size & Weight

  • Height: 1.6″
  • Width: 10.41″
  • Depth: 8.11″

Features & Benefits

  • 110 volt
  • Infrared remote control included
  • HDMI (HD) video output
  • RCA composite (SD) video output
  • Over-the-air input
  • Tuner module: 8PSK
  • DRAM memory: 1 GB
  • Flash memory: 8 GB
  • Processor speed: 5000 DMIPS

In the Box

  • DISH Wally HD Satellite Receiver
  • Remote Control with 2 AA Batteries
  • 6 ft A/V Cable
  • 8 ft HDMI Cable
  • Detachable Power Cable

Warranty & Support

  • Warranty: 1 Year From Date of Activation

DISH ViP211z HDTV Single Tuner Receiver Tech SpecsDISH ViP211z HDTV Single Tuner Satellite Receiver Tech Specs

  • Height: 2.0”
  • Width: 12.9″
  • Depth: 8.9″
  • Single-tuner Satellite Receiver
  • Energy Star Certified
  • HD Technology
  • DVR Ready
  • Supports DISH Pay-as-you-go Programming
  • Compatible with Winegard Over-the-air Antennas
  • Local Channels Included on DISH Programming Guide



  • An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver
  • View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide.
  • An OTA antenna must be installed to use the Module.
  • A satellite signal and a DISH programming subscription is required to operate the OTA module.


  • Locate the cover on the left side of the back panel on your DISH Network receiver. Using a Phillips head screwdriver remove the two screws attaching the cover to the receiver. You can dispose of the cover, but you will need the screws for the next step.
  • Carefully slide the Over-The-Air Module into the module port, making sure the labeling on the module is right-side up. Attach the module using the two screws that were removed in the previous step.

Related posts: