DISH Wally HD Satellite Receiver Tech Specs

Size & Weight

• Height: 1.6″
• Width: 10.41″
• Depth: 8.11″

Features & Benefits

• 110 volt
• Infrared remote control included
• HDMI (HD) video output
• RCA composite (SD) video output
• Over-the-air input
• Tuner module: 8PSK
• DRAM memory: 1 GB
• Flash memory: 8 GB
• Processor speed: 5000 DMIPS

In the Box

• DISH Wally HD Satellite Receiver
• Remote Control with 2 AA Batteries
• 6 ft A/V Cable
• 8 ft HDMI Cable
• Detachable Power Cable

Warranty & Support

• Warranty: 1 Year From Date of Activation

DISH ViP211z HDTV Single Tuner Satellite Receiver Tech Specs

• Height: 2.0”
• Width: 12.9″
• Depth: 8.9″

• Single-tuner Satellite Receiver
• Energy Star Certified
• HD Technology
• DVR Ready
• Supports DISH Pay-as-you-go Programming
• Compatible with Winegard Over-the-air Antennas
• Local Channels Included on DISH Programming Guide

DISH MT2 OTA Module

Features

• An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver
• View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide.
• An OTA antenna must be installed to use the Module.
• A satellite signal and a DISH programming subscription is required to operate the OTA module.

Setup

• Locate the cover on the left side of the back panel on your DISH Network receiver. Using a Phillips head screwdriver remove the two screws attaching the cover to the receiver. You can dispose of the cover, but you will need the screws for the next step.
• Carefully slide the Over-The-Air Module into the module port, making sure the labeling on the module is right-side up. Attach the module using the two screws that were removed in the previous step.