High Gain satellite dish

High Gain satellite dish

The most well-known reflector antenna is the parabolic reflector antenna , commonly known as a satellite dish antenna . Examples of this dish antenna are shown in the following Figures. Figure 1. The big dish antenna of Stanford University. Figure 2. A random direcTV dish antenna on a roof. Parabolic reflectors typically have a very high gain (30-40 dB is common) and low cross polarization. They also have a reasonable bandwidth, with the fractional [...]

Read more

Remove satellite dish

Remove satellite dish

Standard satellite dishes are receivers that are typically 19” – 24” inches in diameter. These satellite dishes are generally provided by DirectTV or Dish Network, but similar satellite receivers come standard with WildBlue, Hughesnet, and other services. Ground Mounted Pricing Is your dish at ground level on a pole or stand? These removals are fast and start at just $149. First Story Pricing If your dish is on a first story roof or is mounted to [...]

Read more

Mobile satellite Dishes

Mobile satellite Dishes

The Flyaway is easily setup on the ground in minutes. Often the ground mounting bracketing is not necessary if there is no wind and the surface is even. Power to the Flyaway may be supplied by an optional 1 or 2 watt portable Honda generator, or by a 400 watt mini inverter. more on power The universal fly-and-drive bracketing may mount the flyaway to most roof-racks, including rental vehicles. The three piece system (4 pieces with fly-and-drive bracketing) [...]

Read more

Satellite dish solar cooker

Satellite dish solar cooker

He started with an old Ku Band dish and covered it with aluminum tape, for better reflection of the sunlight. Once the curve of the dish became too severe, he started placing the tape vertically, so make sure to keep that in mind. He uses the aluminum tape as a quicker, cheaper and comparable alternative to tempered or mirrored glass. Once all the tape is on, and the dish front is completely covered, it s time to angle it in the desired direction [...]

Read more

Satellite dish solar collector

Satellite dish solar collector

This build can be divided into a few easy steps or subcomponents. The Dish, The tracking system, and the heat exchanger/collector. These are things you will need for this build 1. An old C-Band sattelite dish. These are still floating around in peoples yards and junk piles.If you ask some people will probably let you have it for removing it. You will need the pole, mount and actuator to go with it. If the actuator is bad you can get new ones from [...]

Read more
1 2 3 4 5