Satellite Dishes signal

Satellite dishes Signal

Before re-peaking your satellite dish, access the Signal Meters menu from the Settings and Help menu on your receiver to use the signal meter to monitor the broadcast signal to your satellite dish. To access the Signal Meters menu:

  1. Press the menu button on your remote.
  2. Select Settings and Help on the left hand menu.
  3. Select Settings.
  4. Select Satellite on the left hand menu.
  5. Select View Signal Strength on the bottom right-hand screen (scroll to it using the arrows on your remote).
  6. Select Signal Meters on the bottom right-hand screen.

Re-position your television to be in your line of sight while re-peaking your satellite dish. If possible, have a friend monitor the signal meter and relay the broadcast signal strength to you while you are re-peaking your satellite dish.

To re-peak your dish you will need to perform these tasks:

  1. Check that the mast is level.
  2. Adjust the azimuth of the satellite dish.
  3. Adjust the elevation of the satellite dish.

Warning: Use caution when adjusting the mast. The weight of the satellite dish may cause the mast to swing down and hit you, a bystander, or nearby objects. This could cause bodily injury or damage to nearby objects and the satellite dish. Always grip the mast around its outside circumference to prevent injury to your fingers.

Related posts:

  • avatar Why are satellite dishes concave.
  • avatar Who invented the satellite dish?