Primesat P14MOT 1.4m prime focus motorised dish. At last a high gain high quality prime focus dish. In the early days of satellite most dishes were prime focus. These days most dishes are offset. This is two ways of doing the same job but prime focus dishes point upwards and look purposeful. From the appearance point of view they are usually the enthusiast's favorite. This one is made of aluminuim and is one piece. (As a general rule, aluminium is preferable to steel and 1-piece tends to be more efficient that "petalised" or segments.) This attractive dish comes complete with a very heavy duty polar mount, a prime focus Invacom adjustable feedhorn with Primesat yellow cap and Invacom LNB. The polar mount is "dipped galvanised" which is the best possible type of treatment for withstanding corrosion in high salt areas. Everything about this dish is high quality. All of the nuts and bolts are made of stainless steel. The elevation adjusters are made of brass. Also show in the picture is an optional Primesat GS761FW ground stand.

Technical Data
Dish material - Aluminium
Polar mount - Heavy duty galvanised steel polar mount. The collar fits a 76mm diameter pole. The feed support arms are dipped galvanised.
Adjustable feed support boss included, 23mm-40mm.
Invacom feedhorn with Primesat yellow cap and Invacom 0.3dB c120 flange SNF-031 included. Optional twin, quad or quatro LNBs available.
F/D Ratio - 0.41
Gain @ 10.95 GHz 41.8 dB
Gain @ 11.70 GHz 42.5 dB
Gain @ 12.70 GHz 43.3 dB
Useable electrical diameter 1330mm. Maximum diameter 1440mm
Efficiency - 69 %
Beam width 1.2 degrees
Frequency Range 10, 50 GHz - 13, 00 GHz
Jeager HARL3618, 18-inch 36V Superjack actuator included.

Primesat P14FIX 1.4m prime focus fixed dish. Specifications as per technical data above. The fixed version uses the same reflector and a galvanised AZEL mount with a collar for a 76mm pole The same recommended Primesat GS761FW ground stand. can be used. Again stainless steel bolts, nuts and brass elevation adjusters are used. See pictures above.